https://unofficialtwrp.com/twrp-3-3-1-root-unihertz-titan/
Contents
Download twrp 3.3.1 Root Unihertz Titan:
unofficial build of twrp 3.3.1 have Now been available for the Unihertz Titan, user Who own Unihertz Titan can Root it by following the below Instructions. to Install twrp Recovery on Unihertz Titan first you need to unlock it’s bootloader after that You can Root it by flashing Magisk 21.4.zip.
Unihertz Titan Run on MT6771 SoC along With Android 9.0 6GB of RAM and 128GB of Internal Memory. it come with 4.6 Inch IPS Display with the Resolution of 1430 X 1438 Pixels.
Disclaimer:
- Rooting May Void Your Device Warranty
- Make a backup & Move it to Safe Place Like Pen Drive or PC.
- Make Sure Your Phone at-least 50% Charge to Prevent accidental Shut Down during the Rooting Process.
Download Files:
Note: Flash vbmeta to fix any bootloop issue..
How to Install twrp Recovery on Unihertz Titan:
- Download & Setup Platform tools
- Download and Extract recovery.img & vbmeta file In Platform tools Folder.
- Reboot Phone to bootloader by together holding Volume Down and Power Button
- Connect Phone to PC using the usb cable.
- open CMD in the Platform tools Folder and Send below Code.
Check Device by Sending below Command:
fastboot devices
flash Recovery by Sending below Command:
fastboot flashing unlock fastboot flash recovery recovery.img fastboot boot recovery.img
Install with SP Flash tool:
- Download and Extract SP Flash tools on PC
- Install Mediatek V-COM Driver on PC
- Download & Extract twrp image with Scatter
- Run SP Flash tools From Main Screen Select Scatter File Navigate Scatter.txt File form the twrp Folder and again same navigate and Select DA File
- From the Partition List Select Recovery Partition only. and then Double Click on it Select twrp recovery.img File
- Click Download and Connect Your Switched off Phone. Done.
How to Root Unihertz Titan:
- Download & Move Magisk 21.4.zip to Device Storage.
- Reboot phone to twrp by Pressing Volume up and Power button
- Make a Nandroid backup
- Flash Magisk 21.4 and No_verity _opt_encrypt.ZIP via Install.
- Reboot System now
No comments:
Post a Comment